Print

Pneumatic series machines (RV - PV)

Pneumatic series machines (RV - PV)

RV-PV-1

This thin gauge pneumatic series is a machine fed by rolls of material where the main movements are done by pneumatic cylinders. RV series are made to thermoformed only with  vacuum  while the PV series  are  working with vacuum and pressure.

 

The advantages

  • Angle forming press for quick tool change.
  • Toggle movements systems (Pv).
  • Fast tool locks.

The features

  • Simple film unwind system. For bigger model size, an auto-lifting roll system for a quick and fast setup is provided.
  • Film index with double pin chain driven by servomotor. Optional offset system option to work with printed film..
  • Preheat system that allows heating of the two lateral edges of the material to accommodate thicker and harder material production capabilities.
  • Double heating platen system with individual zone control, to control every part of the heating process.
  • Independents forming station table movements actuated by pneumatic systems.
  • Pneumatic activated plug assist or third motion system on both forming tables for a better material distribution.
  • Four colons trim press with tables driven by an asynchronous motor or by hydraulic system.
  • Inline shear for parts cutting to be used instead of the cutting press.
  • Parts up stacking up stacking or down stacking by pneumatic movement.
  • Station positions controlled by actuators and encoders (optional).
  • Scrap wrapping device with constant tension and safety clutch. Extraction is made by pneumatic system.
  • Optional inline grinding system.
  • Punching press can be supplied in all configurations, both inline for holes and slots.
  •  
  • Optional preheating roller module for material like polypropylene.
  • Optional inline extruder to feed directly the thermoformer.
  • Optional labelling machine for any type of label with adhesive or paper.
  • All adjustments are made from the touchscreen for easier and faster parameter changes.
  • Color touch screen to make parameter adjustments and supervise the thermoforming process.
  • Recipe memory system to do faster tool changeover. Recall or save parameters in a matter of a few seconds.
  • Compact flash card memory backup.
  • Internet-ready to allow our technicians to diagnose or supervise any aspect of the system.

 

  Model RV / PV  16  18  24  33  42  52  52B
 Max  working size (width*index) (mm)*  400x400  500x350  600x400  600x550  650x650  800x650  650x800
 Max  lower strokes tables (mm)*  120  120  120  120  120  120  120
 Max  upper strokes tables (mm)*  120  120  120  120  120  120  120

*Working size and depth customized under request.

 


PDF Details